Initial commit, based on old erispoe VM deploy script

This commit is contained in:
nemo 2019-05-05 19:23:45 +02:00
commit ae222b4231
6 changed files with 613 additions and 0 deletions

5
LICENSE Normal file
View File

@ -0,0 +1,5 @@
MIT License
Copyright (c) <year> <copyright holders>
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

18
README.md Normal file
View File

@ -0,0 +1,18 @@
# deploy_vm
Script to deploy a VM based on debian template (in our case).
The script add IPAM entry for an IPv4 address and an IPv6 range, and deploy/configure a VM based on the VM conf file (see vm-template.conf).
# How to use
* Define your IPAM credentials and adjust parameters in deploy_vm.conf file
* Copy the VM conf file template : cp vm-template.conf vm-user123.conf
* Adjust all parameters in new file vm-user123.conf
* WARNING : if the SSH public key isn't correct, nobody would be able to log on the VM after deploy.
* Run the script : ./deploy_vm.sh <vm-conf-file>
# If problems
* If the script fail and add already do updates in IPAM or on the VM, you can manually finish the deploy OR delete IPAM entries (1 IPv4 and 1 IPv6 range), delete the VM, rectify to avoir the problem and retry deploy.
# To do
* Verify if VM conf file parameters are numbers before test the interval (actually in the same line)
* Verify deploy_vm.conf parameters.

3
creds Normal file
View File

@ -0,0 +1,3 @@
# User and password to request a token on phpIPAM API
USER_IPAM='user'
PASSWORD_IPAM='password'

22
deploy_vm.conf Normal file
View File

@ -0,0 +1,22 @@
# URL of the API
URL="https://ipam.example.conf/api/${USER_IPAM}"
VM_BRIDGE_DEV="vmbr99"
IPV6_GATEWAY="fe80::123:123:123:123"
# ID of the ranges, you can put multiple ranges per AFI
ID_RANGES_V4='123 234'
ID_RANGES_V6='345'
# Only one value in next params
ID_RANGE_V4_TO_CREATE_VM='123'
ID_RANGE_V6_TO_CREATE_VM='345'
VM_DISK_MIN=32
VM_DISK_MAX=64
VM_CPU_MIN=1
VM_CPU_MAX=4
VM_RAM_MIN=512
VM_RAM_MAX=2048

544
deploy_vm.sh Executable file
View File

@ -0,0 +1,544 @@
#!/bin/bash
# Script to deploy a VM based on debian template
# You need to provide a VM conf file with all params defined (see vm-template.conf)
echo -e "\n---------- SCRIPT ${0} ----------\n"
echo "INFO : the script ${0} started..."
# Get ID for new VM
VM_ID=$(pvesh get /cluster/nextid)
echo "INFO : the VM_ID for the new VM will be ${VM_ID}"
usage() {
printf "Usage of ${0} : ${0} <vm-conf-file>\n"
printf "\tvm-conf-file has to contain variables VM_HOSTNAME, USER_MAIL, USER_SSH_PUB_KEY, VM_DISK, VM_CPU, VM_RAM and VM_TEMPLATE_ID\n"
printf "\t-h, --help\tPrint this help\n"
}
echo -e "\n---------- CHECK REQUIREMENTS ----------\n"
# Check if file is provided or help asked
echo "INFO : Check if VM conf file provided..."
if [ $1 ]; then
if [ $1 = '-h' ] || [ $1 = '--help' ]; then
usage
exit 0
elif [ $# -lt 1 ]; then
echo 'ERROR : VM conf file not specified'
usage
exit 1
else
# Verification of the presence of VM conf file
if [ -f "$1" ]; then
VM_CONF_FILE=$1
. ${VM_CONF_FILE}
if [ $? -ne 0 ]
then
echo 'ERROR : problem during read VM conf file, please check the VM conf file'
exit 1
fi
else
echo 'ERROR : VM conf file not found, check path'
exit 1
fi
fi
else
echo 'ERROR : No parameter specified'
usage
exit 1
fi
# INFO : Check if creds file is found
echo "INFO : Check if creds file is found (IPAM credentials)..."
CREDS_FILE='./creds'
if [ -f $CREDS_FILE ]; then
. $CREDS_FILE
CURL='curl -s -k -sS'
else
echo 'ERROR : The file creds doesnt exist'
exit 1
fi
# Check if general script params file is found
echo "INFO : Check if general script params file is found..."
CONF_FILE='./deploy_vm.conf'
if [ -f $CONF_FILE ]; then
. $CONF_FILE
else
echo "ERROR : The file ${CONF_FILE} doesnt exist"
exit 1
fi
# Check if all required params are provided and not empty
echo "INFO : Check if all required params are provided and not empty in VM conf file..."
if [ -z "${VM_HOSTNAME}" ] || [ -z "${USER_MAIL}" ] || [ -z "${USER_SSH_PUB_KEY}" ] || [ -z "${VM_DISK}" ] || [ -z "${VM_CPU}" ] || [ -z "${VM_RAM}" ] || [ -z "${VM_TEMPLATE_ID}" ]
then
echo 'ERROR : all required params not defined in VM conf file, required params : VM_HOSTNAME, USER_MAIL, USER_SSH_PUB_KEY, VM_DISK, VM_CPU, VM_RAM and VM_TEMPLATE_ID.'
exit 1
fi
# Delete space from hostname and truncate to 32 chars
VM_HOSTNAME_TRUNCATE=$(echo ${VM_HOSTNAME} | cut -c 1-32)
echo "INFO : Check VM_HOSTNAME param format (after truncate if necessary)..."
# Check VM_HOSTNAME_TRUNCATE
echo ${VM_HOSTNAME_TRUNCATE} | grep "^[-a-zA-Z0-9]*$" > /dev/null
if [ $? -ne 0 ]; then
echo 'ERROR : the VM hostname can only contain "a-z", "A-Z", "0-9" or "-" chars (no space or other special chars)'
exit 1
fi
echo "INFO : Check USER_MAIL param format..."
# Check USER_MAIL
if [[ ! "${USER_MAIL}" =~ ^[a-zA-Z0-9._%+-]+@[a-zA-Z0-9.-]+\.[a-zA-Z]{2,4}$ ]]; then
echo 'ERROR : Email address is invalid'
exit 1
fi
# Regex to check if value is a number
RE='^[0-9]+$'
# Var to contain size to extend disk
VM_DISK_EXTEND=0
echo "INFO : Check VM_DISK param format and size limits..."
# Check VM_DISK
if [ ${VM_DISK} -lt ${VM_DISK_MIN} ] || [ ${VM_DISK} -gt ${VM_DISK_MAX} ] || [[ ! ${VM_DISK} =~ ${RE} ]]; then
echo "ERROR : the disk size has to be between ${VM_DISK_MIN} and ${VM_DISK_MAX}"
exit 1
fi
echo "INFO : Get the size to extend disk if necessary..."
# Set the size to extend disk if necessary
if [ ${VM_DISK} -gt ${VM_DISK_MIN} ]; then
VM_DISK_EXTEND=$(( ${VM_DISK}-${VM_DISK_MIN} ))
fi
echo "INFO : Check VM_CPU param format and number limits..."
# Check VM_CPU
if [ ${VM_CPU} -lt ${VM_CPU_MIN} ] || [ ${VM_CPU} -gt ${VM_CPU_MAX} ] || [[ ! ${VM_CPU} =~ ${RE} ]]; then
echo "ERROR : the vCPU core number has to be between ${VM_CPU_MIN} and ${VM_CPU_MAX}"
exit 1
fi
echo "INFO : Check VM_RAM param format and size limits..."
# Check VM_RAM
if [ ${VM_RAM} -lt ${VM_RAM_MIN} ] || [ ${VM_RAM} -gt ${VM_RAM_MAX} ] || [[ ! ${VM_RAM} =~ ${RE} ]]; then
echo "ERROR : the RAM size has to be between ${VM_RAM_MIN} and ${VM_RAM_MAX}"
exit 1
fi
echo "INFO : Check VM_TEMPLATE_ID param format..."
# Check VM_TEMPLATE_ID
if [[ ! ${VM_TEMPLATE_ID} =~ ${RE} ]]; then
echo "ERROR : VM template ID provided is not a number"
exit 1
fi
echo "INFO : Check if VM_TEMPLATE_ID param match with a VM template on this HV..."
# Check if VM_TEMPLATE_ID is a VM template on this HV
qm config ${VM_TEMPLATE_ID} | grep "^template: 1$" > /dev/null
if [ $? -ne 0 ]; then
echo "ERROR : VM template ID does not match with a template VM on this HV"
exit 1
fi
# Connection to IPAM API
echo 'INFO : Connecting to the IPAM API...'
RES_AUTHENT=$(${CURL} -X POST --user ${USER_IPAM}:${PASSWORD_IPAM} ${URL}/user/)
CODE_RETOUR_RES_AUTHENT=$(echo ${RES_AUTHENT} | jq '.code')
if [ ${CODE_RETOUR_RES_AUTHENT} != 200 ]; then
echo "ERROR : Wrong HTTP code from the API : ${CODE_RETOUR_RES_AUTHENT} ${RES_AUTHENT}"
echo "ERROR : Unable to join/connect IPAM (to register VM IPs)"
exit 1
fi
# Get IPAM API Token
echo 'INFO : Getting IPAM API token...'
TOKEN=$(echo ${RES_AUTHENT} | jq -r '.data.token')
if [ ! -n "${TOKEN}" ]; then
echo 'ERROR : Empty IPAM API token'
exit 1
fi
# Check if VM_ID is already used by an IPAM IPv4
echo "INFO : Check if VM_ID is already used by an IPAM IPv4..."
for ID_RANGE_V4 in ${ID_RANGES_V4}; do
# Get IPV4 informations and check HTTP code
INFOS_V4=$(${CURL} --header "Content-type: application/x-www-form-urlencoded" --header "token: $TOKEN" -X GET "${URL}/subnets/${ID_RANGE_V4}/addresses")
CODE_RETOUR_INFOS_V4=$(echo ${INFOS_V4} | jq '.code')
if [ ${CODE_RETOUR_INFOS_V4} != 200 ]; then
echo "ERROR : Wrong code returned for IPv4 range ${ID_RANGE_V4}: ${CODE_RETOUR_INFOS_V4}"
exit 1
fi
VM_IPV4=$(echo ${INFOS_V4} | jq -r ".data[] | select(.custom_vm_id==\"${VM_ID}\") | .ip")
if [ ! -z "${VM_IPV4}" ]
then
echo "ERROR : the next VM ID is already used by an IPv4 in IPAM (${VM_IPV4}), please check an delete all IPAM's entries associated to the new vm_id ${VM_ID} before run this script."
exit 1
fi
done
# Check if VM_ID is already used by an IPAM IPv6 range
echo "INFO : Check if VM_ID is already used by an IPAM IPv6 range..."
for ID_RANGE_V6 in ${ID_RANGES_V6}; do
# Get IPV6 ranges informations and check HTTP code
INFOS_RANGES_V6=$(${CURL} --header "Content-type: application/x-www-form-urlencoded" --header "token: $TOKEN" -X GET ${URL}/subnets/${ID_RANGE_V6}/slaves/)
CODE_RETOUR_INFOS_RANGES_V6=$(echo ${INFOS_RANGES_V6} | jq '.code')
if [ ${CODE_RETOUR_INFOS_RANGES_V6} != 200 ]; then
echo "ERROR : Wrong code returned for IPv4 range ${ID_RANGE_V6}: ${CODE_RETOUR_INFOS_RANGES_V6}"
exit 1
fi
VM_IPV6=$( echo ${INFOS_RANGES_V6} | jq -r ".data[] | select(.custom_vm_id==\"${VM_ID}\") | .subnet")
if [ ! -z "${VM_IPV6}" ]
then
echo "ERROR : the next VM ID is already used by an IPv6 range in IPAM (${VM_IPV6}/48), please check an delete all IPAM's entries associated to the new vm_id ${VM_ID} before run this script."
exit 1
fi
done
echo -e "\n---------- CHECK REQUIREMENTS OK ----------"
echo -e "\n---------- CREATE IPAM ENTRIES ----------\n"
# Add IPv4 in IPAM for the new VM
echo "INFO : Add IPv4 in IPAM... (UPDATE IPAM)"
ADD_V4=$(${CURL} --data "description"="VM ${VM_HOSTNAME_TRUNCATE}" --data "custom_vm_id"="${VM_ID}" --header "Content-type: application/x-www-form-urlencoded" --header "token: $TOKEN" -X POST "${URL}/addresses/first_free/${ID_RANGE_V4_TO_CREATE_VM}")
CODE_RETOUR_ADD_V4=$(echo ${ADD_V4} | jq '.code')
if [ ${CODE_RETOUR_ADD_V4} != 201 ]; then
echo "ERROR : Wrong code returned for IPv4 ADD on range ${ID_RANGE_V4_TO_CREATE_VM} : ${CODE_RETOUR_ADD_V4} ${ADD_V4}"
exit 1
fi
VM_IPV4_NEW=$(echo ${ADD_V4} | jq -r '.data')
echo "INFO : VM IPv4 is ${VM_IPV4_NEW}"
# Get the subnet ID of the VM
echo "INFO : Get the subnet mask and gateway for the VM..."
IPAM_NEW_IPV4_DETAILS=$(${CURL} --header "Content-type: application/x-www-form-urlencoded" --header "token: $TOKEN" -X GET "${URL}/addresses/search/${VM_IPV4_NEW}/")
CODE_RETOUR_IPAM_NEW_IPV4_DETAILS=$(echo ${IPAM_NEW_IPV4_DETAILS} | jq '.code')
if [ ${CODE_RETOUR_IPAM_NEW_IPV4_DETAILS} != 200 ]; then
echo "ERROR : Wrong code returned while getting subnet for ${VM_IPV4_NEW} : ${CODE_RETOUR_IPAM_NEW_IPV4_DETAILS}"
exit 1
fi
VM_IPV4_NEW_SUBNET_ID=$(echo ${IPAM_NEW_IPV4_DETAILS} | jq -r ".data[] | .subnetId")
echo "INFO : IPAM Subnet ID of the VM is ${VM_IPV4_NEW_SUBNET_ID}"
# Get the gateway and the mask of the VM
echo "INFO : Get the gateway and the mask of the VM..."
IPAM_NEW_IPV4_SUBNET=$(${CURL} --header "Content-type: application/x-www-form-urlencoded" --header "token: $TOKEN" -X GET "${URL}/subnets/${VM_IPV4_NEW_SUBNET_ID}/")
CODE_RETOUR_IPAM_NEW_IPV4_SUBNET=$(echo ${IPAM_NEW_IPV4_SUBNET} | jq '.code')
if [ ${CODE_RETOUR_IPAM_NEW_IPV4_SUBNET} != 200 ]; then
echo "ERROR : Wrong code returned for IPv4 subnet ${VM_IPV4_NEW_SUBNET_ID} : ${CODE_RETOUR_IPAM_NEW_IPV4_SUBNET}"
exit 1
fi
VM_IPV4_NEW_SUBNET_GW=$(echo ${IPAM_NEW_IPV4_SUBNET} | jq -r ".data.gateway.ip_addr")
VM_IPV4_NEW_SUBNET_MASK=$(echo ${IPAM_NEW_IPV4_SUBNET} | jq -r ".data.mask")
echo "INFO : IPv4 Gateway for the VM is ${VM_IPV4_NEW_SUBNET_GW}"
echo "INFO : IPv4 Mask of the VM is ${VM_IPV4_NEW_SUBNET_MASK}"
# Add IPv6 range in IPAM for the new VM
echo "INFO : Add IPv6 range in IPAM... (UPDATE IPAM)"
ADD_RANGES_V6=$(${CURL} --data "custom_vm_id"="${VM_ID}" --data "isFull"="1" --data "description"="VM ${VM_HOSTNAME_TRUNCATE}" --header "Content-type: application/x-www-form-urlencoded" --header "token: $TOKEN" -X POST ${URL}/subnets/${ID_RANGE_V6_TO_CREATE_VM}/first_subnet/48/)
CODE_RETOUR_ADD_RANGES_V6=$(echo ${ADD_RANGES_V6} | jq '.code')
if [ ${CODE_RETOUR_ADD_RANGES_V6} != 201 ]; then
echo "ERROR : Wrong code returned for IPv6 range ${ID_RANGE_V6_TO_CREATE_VM}: ${CODE_RETOUR_ADD_RANGES_V6} ${ADD_RANGES_V6}"
echo "ERROR : Before retry, don't forget to DELETE previously registered IPv4 in IPAM : {VM_IPV4_NEW}."
exit 1
fi
RANGE_IPV6_NEW=$(echo ${ADD_RANGES_V6} | jq -r '.data')
RANGE_IPV6_NEW_WITHOUT_MASK=$(echo ${RANGE_IPV6_NEW} | cut -d'/' -f1)
RANGE_IPV6_NEW_MASK=$(echo ${RANGE_IPV6_NEW} | cut -d'/' -f2)
echo "INFO : IPv6 range for the VM : ${RANGE_IPV6_NEW_WITHOUT_MASK}/${RANGE_IPV6_NEW_MASK}"
echo -e "\n---------- CREATE IPAM ENTRIES OK ----------"
echo -e "\n---------- CREATE VM ----------\n"
# Clone template to new VM
echo "INFO : create new VM by cloning template (more than 1min to wait)... (CREATE NEW VM ${VM_ID} ${VM_HOSTNAME_TRUNCATE})"
qm clone ${VM_TEMPLATE_ID} ${VM_ID} -full -name ${VM_HOSTNAME_TRUNCATE} -storage local_data &> /dev/null
if [ $? -ne 0 ]; then
echo 'ERROR : problem during cloning, please finish manually the deploy OR delete VM and IPAM information'
exit 1
fi
# Wait some seconds to be sure the cloning is finished (else problems occurs)
sleep 60
# Change CPU number if necessary
if [ "${VM_CPU}" -ne 1 ]; then
echo "INFO : Change vCPU core number to ${VM_CPU} core(s)..."
qm set ${VM_ID} --cores ${VM_CPU} &> /dev/null
if [ $? -ne 0 ]; then
echo 'ERROR : problem during changing vCPU core number, please finish manually the deploy OR delete VM and IPAM information'
exit 1
fi
else
echo "INFO : No need to change vCPU core number, value is ${VM_CPU} core(s)"
fi
# Change RAM size if necessary
if [ "${VM_RAM}" -ne 512 ]; then
echo "INFO : Extend RAM (resize to ${VM_RAM}MB)..."
qm set ${VM_ID} --memory ${VM_RAM} &> /dev/null
if [ $? -ne 0 ]; then
echo 'ERROR : problem during resizing RAM, please finish manually the deploy OR delete VM and IPAM information'
exit 1
fi
else
echo "INFO : No need to resize RAM, value is ${VM_RAM}MB"
fi
# Change Disk size if necessary
if [ "${VM_DISK_EXTEND}" -ne 0 ]; then
echo "INFO : Extend disk (resize to ${VM_DISK}GB)..."
qm resize ${VM_ID} virtio0 +${VM_DISK_EXTEND}G #&> /dev/null
if [ $? -ne 0 ]; then
echo 'ERROR : problem during resizing disk, please finish manually the deploy OR delete VM and IPAM information'
exit 1
fi
else
echo "INFO : No need to resize disk, value is ${VM_DISK}GB"
fi
# Start VM
echo "INFO : start the new VM..."
qm start ${VM_ID}
if [ $? -ne 0 ]; then
echo 'ERROR : problem during starting the VM, please finish manually the deploy OR delete VM and IPAM information'
exit 1
fi
# Wait the VM starting
sleep 20
# Define SSH params
SSH_OPT="-6 -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no"
# Get the FE80 IPv6 of the new VM
echo "INFO : Get the FE80 IPv6 of the new VM..."
VM_MAC=$(grep net0 /etc/pve/qemu-server/${VM_ID}.conf | cut -d '=' -f 2 | cut -d ',' -f 1)
VM_FE80=$(ipv6calc --action prefixmac2ipv6 --in prefix+mac --out ipv6addr fe80:: $VM_MAC)
# Define SSH host
SSH_HOST="root@${VM_FE80}%${VM_BRIDGE_DEV}"
# Create network configuration file for new VM
echo "INFO : Create network configuration file for new VM..."
echo "# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto ens18
allow-hotplug ens18
iface ens18 inet static
address ${VM_IPV4_NEW}/${VM_IPV4_NEW_SUBNET_MASK}
gateway ${VM_IPV4_NEW_SUBNET_GW}
iface ens18 inet6 static
address ${RANGE_IPV6_NEW_WITHOUT_MASK}1/${RANGE_IPV6_NEW_MASK}
gateway ${IPV6_GATEWAY}" > /tmp/interfaces_vm${VM_ID}
# Replace network configuration file on new VM
echo "INFO : Replace network configuration file on new VM... (VM NETWORK CONF UPDATE)"
scp ${SSH_OPT} /tmp/interfaces_vm${VM_ID} root@[${VM_FE80}%${VM_BRIDGE_DEV}]:/etc/network/interfaces &> /dev/null
if [ $? -ne 0 ]; then
echo 'ERROR : problem during copy of the new network conf file, please finish manually the deploy OR delete VM and IPAM information'
# Clean temp file
echo "INFO : Clean temp file"
rm /tmp/interfaces_vm${VM_ID}
exit 1
fi
# Clean temp file
echo "INFO : Clean temp file"
rm /tmp/interfaces_vm${VM_ID}
# Restart networking service on VM to apply new network configuration
echo "INFO : Restart networking service on VM to apply new network configuration... (systemctl restart networking)"
ssh ${SSH_OPT} ${SSH_HOST} "systemctl restart networking" &> /dev/null
if [ $? -ne 0 ]; then
echo 'ERROR : problem during restart networking service on VM, please finish manually the deploy OR delete VM and IPAM information'
exit 1
fi
# Regenerate SSH host keys for the VM and restart SSHD
echo "INFO : Regenerate SSH host keys for the VM and restart SSHD..."
ssh ${SSH_OPT} ${SSH_HOST} "/bin/rm -v /etc/ssh/ssh_host_* && dpkg-reconfigure openssh-server && systemctl restart ssh" &> /dev/null
if [ $? -ne 0 ]; then
echo 'ERROR : problem during regenerate SSH host keys for the VM, please finish manually the deploy OR delete VM and IPAM information'
exit 1
fi
# Get FingerPrint
echo "INFO : Get SSH FingerPrint of the new VM..."
file=$(mktemp)
sleep 1
ssh-keyscan ${VM_FE80}%${VM_BRIDGE_DEV} >${file} 2>/dev/null
sleep 1
SSH_FP="$(ssh-keygen -l -f ${file})"
sleep 1
rm ${file}
# Resize disk and LV if disk has been extended
if [ "${VM_DISK_EXTEND}" -ne 0 ]; then
echo "INFO : Create new primary partition to extend VG... (Create new partition)"
ssh ${SSH_OPT} ${SSH_HOST} "echo -e \"n\np\n\n\n\nt\n\n8e\nw\n\" | fdisk /dev/vda" &> /dev/null
# Don't check errors because return code in error (system has to reboot)
echo "INFO : Reboot the system to reload partition table etc... (reboot)"
ssh ${SSH_OPT} ${SSH_HOST} "reboot" &> /dev/null
# Wait for system reboot
sleep 20
echo "INFO : Create new PV... (pvcreate /dev/vda3)"
ssh ${SSH_OPT} ${SSH_HOST} "pvcreate /dev/vda3" &> /dev/null
if [ $? -ne 0 ]; then
echo 'ERROR : problem during create PV, please finish manually the deploy OR delete VM and IPAM information'
exit 1
fi
echo "INFO : Add new PV to VG default_vg... (vgextend default_vg /dev/vda3)"
ssh ${SSH_OPT} ${SSH_HOST} "vgextend default_vg /dev/vda3" &> /dev/null
if [ $? -ne 0 ]; then
echo 'ERROR : problem during add new PV in VG, please finish manually the deploy OR delete VM and IPAM information'
exit 1
fi
echo "INFO : Resize LV on disk... (RESIZE VM LV)"
ssh ${SSH_OPT} ${SSH_HOST} "lvextend -l +100%FREE /dev/mapper/default_vg-root_1" &> /dev/null
if [ $? -ne 0 ]; then
echo 'ERROR : problem during resizing LV, please finish manually the deploy OR delete VM and IPAM information'
exit 1
fi
echo "INFO : resize2fs the LV... (RESIZE VM LV FS)"
ssh ${SSH_OPT} ${SSH_HOST} "resize2fs /dev/mapper/default_vg-root_1" &> /dev/null
if [ $? -ne 0 ]; then
echo 'ERROR : problem during resize2fs, please finish manually the deploy OR delete VM and IPAM information'
exit 1
fi
else
echo "INFO : No need to resize LV on disk"
fi
# Update VM system
echo "INFO : Update VM OS, this can take some minutes... (apt update -q && apt upgrade -y -q)"
ssh ${SSH_OPT} ${SSH_HOST} "apt update -q && apt upgrade -y -q" &> /dev/null
if [ $? -ne 0 ]; then
echo 'ERROR : problem during updating the VM, please finish manually the deploy OR delete VM and IPAM information'
exit 1
fi
# Delete root .bash_history
echo "INFO : Delete root user .bash_history... (rm /root/.bash_history)"
ssh ${SSH_OPT} ${SSH_HOST} "rm /root/.bash_history" &> /dev/null
if [ $? -ne 0 ]; then
echo 'ERROR : problem during deleting root .bash_history, please finish manually the deploy OR delete VM and IPAM information'
exit 1
fi
# Add user SSH Pub key to root (and erase HV pub key) and reboot
echo "INFO : Add user SSH Pub key to root (and erase HV pub key) and reboot in 1 minute... (WARN : if you provided incorrect SSH pub key, nobody could log in the VM...)"
ssh ${SSH_OPT} ${SSH_HOST} "shutdown --reboot +1 'System is going down for reboot in 1 minute'; echo ${USER_SSH_PUB_KEY} > /root/.ssh/authorized_keys" &> /dev/null
if [ $? -ne 0 ]; then
echo 'ERROR : problem during replace HV SSH pub keys by user SSH pub key or during reboot programming, please finish manually the deploy OR delete VM and IPAM information'
exit 1
fi
echo -e "\n---------- CREATE VM OK ----------\n"
echo "INFO : Send the final mail..."
SUBJECT=$(perl -wse "use utf8; use Encode qw(encode); print encode(\"MIME-Q\",\
\"Votre machine virtuelle GRIFON vient dêtre créée\");")
echo "From: Adminsys GRIFON <adminsys@grifon.fr>
To: ${USER_MAIL}
Cc: adminsys@grifon.fr
Content-Type: text/plain; charset=UTF-8
Subject: ${SUBJECT}
Bonjour,
Votre machine virtuelle vient dêtre créée.
La clé publique SSH que vous nous avez fournie a été mise sur le compte root.
Vous pouvez vous connecter en SSH via
ssh root@${VM_IPV4_NEW}
ssh root@${RANGE_IPV6_NEW_WITHOUT_MASK}1
Votre range IPv6 est ${RANGE_IPV6_NEW}
Nous vous recommandons très vivement de changer les mots de passe root et debian01 (utilisateur par défaut) ainsi que
dinterdire la connexion par SSH en tant que root.
Voir pouvez donc vous connecter, démarrer votre machine virtuelle
et la configurer comme vous le souhaitez.
Le fingerprint SSH de votre VM est :
${SSH_FP}
Si vous souhaitez avoir un reverse DNS, vous pouvez contacter
adminsys@grifon.fr en précisant si vous souhaitez une délagation ou en donnant
le FQDN.
Cordialement,
--
Les adminsys de GRIFON" #| /usr/sbin/sendmail -f adminsys@grifon.fr -t
echo "INFO : script finished, mail sent to the user and adminsys@grifon.fr"
echo -e "\n---------- END OF SCRIPT ${0} ---------\n"
exit 0

21
vm-template.conf Normal file
View File

@ -0,0 +1,21 @@
# Name of the VM (ex : jdoe) NO SPACE HERE OR ORTHER SPECIAL CHAR
VM_HOSTNAME="vm-of-user123"
# Mail to send VM infos to the user (ex : john.doe@example.net)
USER_MAIL="user@example.net"
# SSH public key of the user (ex : ssh-rsa Ihu87QZDIuh[...] user@host)
# WARNING, if this value is incorrect, nobody could connect the deployed VM...
USER_SSH_PUB_KEY="ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCZWqqdey/B95uiSAXJUFo56UHCsk5b3AxRw+SfnuOGyP15tGwOT4AhCyx2XXcxAlnuTNYhONfHg82wVN581suF3w2wnWkJdYqlwmCB20CQENuFXIIcw1ZYTyVcLfdSNhMAO1VuvkvyTEDac2Mh9epMe3lcgYpM/+YZiRfuInDYzixOJOuSz+NFMCm9XHhQDZ3CxZSMjKCV3+yW6vcQ/QfWs749C1JwdTiEMSrwpMm+IwtVnO5Tv4EA/jUs6a+CVo4GtfwIVWH5CGtrc4SYfbfFwoITS3UKDUGgx1YKU81bXrzldlofPxpbBoXozwHi6n6orTu81pKRiok3oN/Vhuhb john@host"
# Disk size in GB (ex : 32)
VM_DISK=32
# vCPU number (ex : 1)
VM_CPU=1
# RAM size in MB (ex : 512)
VM_RAM=512
# VM Proxmox ID of template (ex : 123)
VM_TEMPLATE_ID=123