nrpe-bird/check_bird2_oneshot

#!/bin/sh

# Copyright 2019 alarig <alarig@grifon.fr>
#
# BSD-3-Clause licence
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# 1. Redistributions of source code must retain the above copyright notice,
# this list of conditions and the following disclaimer.
#
# 2. Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation
# and/or other materials provided with the distribution.
#
# 3. Neither the name of the copyright holder nor the names of its contributors
# may be used to endorse or promote products derived from this software without
# specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.

# For debuggin purpose, uncomment the next line and `tail -F` the file.
#exec 2> /tmp/check_bgp.log

# This scipt works with bird2 only

CONF_IGNORE_FILE="/usr/local/etc/nrpe-bird/ignore.cfg"

usage() {
	printf "Usage:\n"
	printf "Must be run with user account able to use birdc/birdc6 or "
	printf "specify -s to use birdc with sudo.\n"
	printf "To ignore sessions, put one per line in ${CONF_IGNORE_FILE}.\n"
}

args=$(getopt hs $*)

if [ $? -ne 0 ]; then
	usage
	exit 3
fi
set -- $args

while :; do
	case "$1" in
		-h)
			usage
			exit 0
			shift;;
		-s)
			SUDO='sudo'
			shift;;
		--)
			shift;
			break;;
	esac
done

birdc="${SUDO} birdc"

test_route_limit() {
	if [ "${ROUTE_HIT_IN}" != "" ]; then
		printf "${protocol_name} has hit import route " >> \
			${DIR}/CRITICAL.txt
		printf "limit\n" >> ${DIR}/CRITICAL.txt
	elif [ "${ROUTE_HIT_OUT}" != "" ]; then
		printf "${protocol_name} has hit export route " >> \
			${DIR}/CRITICAL.txt
		printf "limit\n" >> ${DIR}/CRITICAL.txt
	elif [ ${RATIO_IN} -gt 92 ]; then
		printf "${protocol_name} import route limit is " >> \
			${DIR}/WARNING.txt
		printf "over threshold\n" >> ${DIR}/WARNING.txt
	fi
}

# path expansion for birdc and sudo of FreeBSD
PATH="$PATH:/usr/local/sbin/:/usr/local/bin/"

DIR="$(mktemp -d '/tmp/nrpe-bird.XXXX')"

#$birdc 'show protocols' | awk '$2 ~ "BGP" && $4 !~ "down" { print $0 }' > \
#	${DIR}/bgp_protocols_up.txt

# The sed removes the first two lines (BIRD 2.0.2 ready and Name Proto blah)
$birdc 'show protocols all' 2>${DIR}/bird-err | sed '1,2d;$d' | \
	awk -v RS= -v DIR=$DIR '{print > (DIR "/" $1 ".txt")}'
if [ "$(cat ${DIR}/bird-err)" != '' ]; then
	printf "ERROR: $(cat ${DIR}/bird-err)\n"
	rm -r ${DIR}
	exit 2
fi

for protocol in $(cat ${CONF_IGNORE_FILE}); do
	rm "${DIR}/${protocol}.txt"
done

for protocol in $(find ${DIR} -type f); do
	protocol_name=$(echo ${protocol} | cut -d / -f 4 | cut -d . -f 1)
	STATE="$(head -n 1 ${protocol} | awk '{ print $6 }')"
	ROUTE_LIMIT_IN="$(awk '/Import limit/ { print $3 }' ${protocol})"
	ROUTES_IMPORTED="$(grep 'Routes:' ${protocol} | \
		sed -Ee '/imported/{ s/^.* ([0-9]+) imported.*$/\1/; p;}' -e d)"
	ROUTE_HIT_IN="$(grep -E 'Receive limit:.*HIT' ${protocol})"

	if [ -z ${ROUTE_LIMIT_IN} ]; then
		# There is no import limit, so no ratio either
		RATIO_IN=0
	else
		RATIO_IN=$(echo "(${ROUTES_IMPORTED}*100)/${ROUTE_LIMIT_IN}" \
			| bc)
	fi

	ROUTE_HIT_OUT="$(grep -E 'Export limit:.*HIT' ${protocol})"

	# Plugin return codes:
	# https://nagios-plugins.org/doc/guidelines.html#AEN78
	case ${STATE} in
		# BGP
		# Session states:
		# https://gitlab.labs.nic.cz/labs/bird/blob/master/proto/bgp/bgp.h#L601
		Established)
			test_route_limit
			;;
		OpenSent | OpenConfirm)
			printf "${protocol_name} is in ${STATE} state\n" >> \
				${DIR}/WARNING.txt
			;;
		Idle | Connect | Active)
			printf "${protocol_name} is in ${STATE} state\n" \
				>> ${DIR}/CRITICAL.txt
			;;

		# OSPF
		# https://gitlab.labs.nic.cz/labs/bird/blob/master/proto/ospf/ospf.c#L532
		Running)
			test_route_limit
			;;
		Alone)
			printf "${protocol_name} is in ${STATE} state\n" >> \
				${DIR}/WARNING.txt
			exit 1
			;;

		# Or what	
		*)
			if [ -z ${STATE} ]; then
				printf "Empty state for ${protocol_name}\n" \
					>> ${DIR}/UNKNOWN.txt
			else
				printf "Unknown state ${STATE} for " >> \
					${DIR}/UNKNOWN.txt
				printf "${protocol_name}\n" >> ${DIR}/UNKNOWN.txt
			fi
			;;
	esac
done

if [ -f ${DIR}/CRITICAL.txt ]; then
	printf "CRITICAL: $(cat ${DIR}/CRITICAL.txt)\n"
	rm -r ${DIR}
	exit 2
elif [ -f ${DIR}/WARNING.txt ]; then
	printf "WARNING: $(cat ${DIR}/WARNING.txt)\n"
	rm -r ${DIR}
	exit 1
elif [ -f ${DIR}/UNKNOWN.txt ]; then
	printf "UNKNOWN: $(cat ${DIR}/UNKNOWN.txt)\n"
	rm -r ${DIR}
	exit 3
else
	printf "OK: This is fine\n"
	rm -r ${DIR}
	exit 0
fi